Tuf Kote Automotive Private Limited

• 4941 is an underbody product for use in the treatment of vehicles during production, at import plants and in aftermarket applications. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar material. Zinc, rubber and plastics are completely unharmed by the product. A clean and economic treatment on the line is assured by the product's ease of application and high dry matter content.
• 4941 is also designed for use on spare parts, machines and iron and steel structures in highly corrosive environment.
• 4941 is also very suitable as an anticorrosive coating for transport and warehousing under extremely corrosive conditions

Application Procedure

• 4941 should be applied on a clean and dry surface.
• Apply using spray gun or brush directly on the area to be protected. Mix well before use
• Dilute if necessary using solvent thinner or mineral turpentine.
• Use eye and hand protection at time of application.
• Seek medical attention if ingested.

Range Of Use

• 4941 is designed for treatment of cars, buses, trucks and other vehicles, on line application as well as in the aftermarket. The product is designed to over protect areas pre-treated with TS-3852 also under chassis of vehicle when robust protection is required.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 2 - 3 working days
• Packaging Details: 500 ml aerosol / 1 ltr can / 20 LtrsM S drum

Tuf Kote Zinc Spray

Product formulated for excellent anti corrosive properties and sacrificial protection for weldedjoints, marine equipment, construction structures, and trusses exposed to severe corrosiveenvironments. A must for M.S articles like nuts bolts flanges Pipes in harsh environments. Touch upof old or damaged galvanized surfaces can easily be done using this product.

Advantages:

Zinc - rich galvanizer provides outstanding corrosion resistance in highly corrosive environments. Thezinc metal coating creates high electrical conductivity which provides sacrificial protected on to anyareas of exposed underlying steel. Easy to use, does not require any painting equipment. Useful forDIY touchup jobs for old or damaged galvanized surfaces.

Uses:

• Ship Building & Ship repairs yards
• For Maintenance purpose in Petrochemical refineries
• Electronics Industries etc.
• Extensively used for touch up of old or damaged galvanized structures and surfaces.
• Fences and gates
• Home, garden and farm equipment
• Construction equipment
• Structural steel
• Guard rails
• Welding seams
• Pipes and fittings

Product Data:

Appearance - Silver Zinc (Matt finish)
Volume - 400 ml
Coverage - 18 Sq. feet ( Approx.)
Touch dry time - 5 - 7 Minutes to touch.
Hard dry - 5 hours
Zinc purity - 98 percent.


MOQ: 400 ml aerosol can

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 500 cans per day
• Delivery Time: Despatch within 7 working days
• Packaging Details: 400 ml aerosol can | 1 ltr can

Tuf Kote 4950 is a fast drying, low cost under body coating.

• When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar material.
• 4950 is also designed for use on spare parts, machines and iron and steel structures in highly corrosive environment.
• 4950 is also very suitable as an anticorrosive coating for transport and warehousing under extremely corrosive conditions

Application Procedure

• 4950 should be applied on a clean and dry surface.
• Apply using spray gun or brush directly on the area to be protected. Mix well before use
• Dilute if necessary using solvent thinner or mineral turpentine.
• Use eye and hand protection at time of application.
• Seek medical attention if ingested.

Range Of Use

• 4950 is designed for treatment of cars, buses, trucks and other vehicles, on line application as well as in the aftermarket.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 working days
• Packaging Details: Box of 10 cans.

Specifications

• 4941 is an underbody product for use in the treatment of vehicles during production, at import plants and in aftermarket applications. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar material. Zinc, rubber and plastics are completely unharmed by the product. A clean and economic treatment on the line is assured by the product's ease of application and high dry matter content.
• 4941 is also designed for use on spare parts, machines and iron and steel structures in highly corrosive environment.
• 4941 is also very suitable as an anticorrosive coating for transport and warehousing under extremely corrosive conditions

Application Procedure

• 4941 should be applied on a clean and dry surface.

• Apply using spray gun or brush directly on the area to be protected. Mix well before use

   

  Dilute if necessary using solvent thinner or mineral turpentine.

• Use eye and hand protection at time of application.

• Seek medical attention if ingested.

Range Of Use

• 4941 is designed for treatment of cars, buses, trucks and other vehicles, on line application as well as in the aftermarket. The product is designed to over protect areas pre-treated with D-3852 also under chassis of vehicle when robust protection is required.

Additional Information:

• Item Code: 4941
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: Product available in 500 ml aerosol can / 1 kg tin / 20 kg drum / 200 kg drum

Underbody Coating is a thixotropic corrosion preventive which provides long-term resistance against corrosion and abrasion even under difficult conditions. When the solvents have evaporated, a tough, elastic, waxy protective film remains on the sheet metal, giving a high degree of protection.

Uses : Underbody Coating is an under body product for treatment of cars, trucks and buses during production, at import plants and in the aftermarket. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar product. Zinc, rubber and plastics are completely unaffected by the product. A clean and economic treatment on the line Is assured by the product's easy application and high solid content.

Underbody Coating is also designed to be used on spare parts, machines and Iron and steel structures in highly corrosion Inductive conditions. It is also very suitable as a transport and storage anticorrosive for long term transporting or warehousing under extremely corrosive circumstances.

Application: Underbody Coating can be applied by spraying with manual or automatic airless application.

Variants of Underbody Coating Available

• Wax based underbody coating
• Bitumen based underbody coating
• Diesel resistant underbody coating
• Transparent underbody coating
• Acrylic under body coating

Pack Size:20 Kgs M S Drum

Additional Information:

• Item Code: underbody
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 days
• Packaging Details: 20 Kgs drum

Having a pre-determined quality administration system, we are thoroughly betrothed in delivering Wheel Arch Area Underbody Coating.

Product details:

• Tamper-proof packaging

• Balanced composition

• No impurities

• Perfectly prepared

• Long lasting

• Seamless finish

Additional Information:

• Item Code: Underbody
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: 20 Kgs

Under Body Coating is a thixotropic corrosion preventive which provides long-term resistance against corrosion and abrasion even under difficult conditions. When the solvents have evaporated, a tough, elastic, waxy protective film remains on the sheet metal, giving a high degree of protection.

Uses :

Under Body Coating is an under body product for treatment of cars, trucks and buses during production, at import plants and in the aftermarket. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar product. Zinc, rubber and plastics are completely unaffected by the product. A clean and economic treatment on the line is assured by the products easy applications and high solid content.

Under Body Coating is also designed to be used on spare parts, machines and iron and steel structures in highly corrosion inductive conditions. It is also very suitable as a transport and storage anticorrosive for long term transporting or warehousing under extremely corrosive circumstances.

Application:

Under Body Coating can be applied by spraying with manual or automatic airless application

Additional Information:

• Item Code: Antirust
• Port of Dispatch: Mumbai
• Delivery Time: Within 3 - 4 working days
• Packaging Details: Products available in 400 ml / 500 ml aerosol cans | 1 ltr can | 20 ltrs drum

Cavity Wax is a corrosion preventative that forms excellent films in cavities. The product is solvent borne and based on mainly synthetic waxes and corrosion inhibitors. When the solvent has evaporated, the product leaves a beige, waxy, water repelling protective film that offers a very good corrosion prevention.

Products in the Cavity Wax are designed for application in closed cavities & open surfaces

Rust preventive Fluid

• These also form a part of the cavity wax family.
• This Product is a rust preventive fluid with excellent film building properties on open surfaces as well as in cavities.
• The product is mainly based on synthetic waxes, oil, corrosion inhibitors and solvent of white spirit type.

Range of use -This is designed for protection of sheet metal , spare parts , air compressors , motors, pumps etc.

Pack Size available : 1 Liter can

Cavity Wax is a corrosion preventative that forms excellent films in cavities.
This product is solvent borne and is based on synthetic waxes and corrosion inhibitors. When the solvent has evaporated, the product leaves a beige, waxy, water repelling protective film that offers a very good corrosion prevention.

Products in the Cavity Wax range are designed for application in closed cavities and open surfaces.

Additional Information:

• Item Code: 3852
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: With 7 - 10 working days
• Packaging Details: 400 ml aerosol can / 1 ltr can / 20 ltrs drum / 200 ltrs drum

Tuf Seal Thermolac Alu250 

• Exhaust Manifold Redresser
• Specially formulated coating to be used on exhaust systems to prevent them from rust.
• Product used contains 99% aluminum........... is heat resistant up to 300 - 400 deg. temperatures
• Provides a good silver colour finish

 

Pack Size :400 ml Aerosol can

Additional Information:

• Production Capacity: 500 cans per day
• Delivery Time: Despatch within 5 - 7 working days
• Packaging Details: 400 ml aerosol can

Product Description

TS4050 - Engine Coating leaves a hard, clear transparent film, is heat resistant upto 200°C. It gives a shiny and clean film which facilitates visual inspection of metal surfaces, reading of labels, numbers etc.
TS4050 - Engine coating has a good adhesion and flexibility on rubber and plastic parts at both high and low temperatures. Has a very short drying time and is designed to be sprayed on surfaces exposed to both high and low temperatures.

Application Procedure

TS4050 - Engine Coating should be applied on a clean and dry surface. Hold can about 15-25 cms. from the surface, depress valve head fully and spray in stroking motion [left-right or up-down] to avoid dripping and extra deposit. Repeat procedure depending on the thickness of film required, after few minutes allowing base film to dry.
Shake well before use, when agitator ball is loosened continue shaking for about two minutes before using.
Clean spray head after use, turn can upside down and spray to empty the valve. If nozzle clogs clean with solvent.

Additional Information:

• Item Code: Enginecoating
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: 500 ml aerosol can / 1 ltr can / 20 ltrs drum

DESCRIPTION

Rusting of iron has been an age-old problem. Iron loses strength due to rusting. Iron spontaneously combines with oxygen and moisture to form a variety of oxides depending upon the conditions of exposure.

This is called "rust". However, this temporary passive stability is gone when the loose rust begins to flake away, exposing the inner surface to further process of rusting and so on.

Converust Primer is a revolutionary, hi-tech product that reverses the process of rusting. converting rust into a stable metal complex without losing the strength of the metal. This is accompanied by an encapsulation process through the formation of a protective film coat. Converust Primer when applied on the surface of the metal changes to a dark blackish coloured protective coating film. This marks the END OF RUSTING OR CORROSION of the metal surface. Converust is also a ‘water-based’ system and it is nonflammable and non-toxic

FEATURES

• It cures at low temperature and very good wetting properties.
• Highly recommended primer coat in protective coating system
• Can be top-coated easily with a broad variety of high performance finish coats.
• Good film build and edge protection
• Non-flammable, no health hazard, non-toxic
• No sandblasting required. Saves labor cost
• Excellent abrasion resistance

RECOMMENDED USE

Automobiles Industries : Body, Spare parts, Ancillary units, structures etc.

Industrial Fabrication : Machinery & Equipment mfg.

Building Construction : RCC structures.- Steel Rebar coating, Structure, Panel, Grills, Gates etc

Ports & Docks : Dry-docking, Jetty, Conveyor belts, Cranes, Pipelines etc.

Shipping Industries : Ship builders, Ship repairs, Containers etc,

Locomotive and Railways : Wagons, Bogies, Coaches, Tracks, Clips, Tankers, Cattle Carrier, Overhead Structures, Engines, etc.

Practically all types of industries where the problem of rusting of Iron is present

COLOUR : Pastel color : FINISH : Semi-glossy

SURFACE PREPARATION

Remove loose rust scales, flaking rust, old paint and dirt from the corroded metal surface with the use of wire brush etc.

However, there is no need to remove all the visible traces of rust, since the adherent rust is reactively converted into a stable polymer complex compound

Converust also does not require different steps of preparation of the metal surface like sandblasting, Phosphating or red oxide coating.

APPLICATION METHOD

Apply Converust with a brush or roller, by dip method or simply by spraying on. Apply two coats of Converust to get minimum DFT of 45/60 micron.

Additional Information:

• Item Code: RC800
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: 1 ltr can / 25 ltr drum

Cavity Wax is a corrosion preventative that forms excellent films in cavities. The product is solvent borne and based on mainly synthetic waxes and corrosion inhibitors. When the solvent has evaporated, the product leaves a beige, waxy, water repelling protective film that offers a very good corrosion prevention.

Products in the Cavity Wax are designed for application in closed cavities & open surfaces

Rust preventive Fluid

• These also form a part of the cavity wax family.
• This Product is a rust preventive fluid with excellent film building properties on open surfaces as well as in cavities.
• The product is mainly based on synthetic waxes, oil, corrosion inhibitors and solvent of white spirit type.

Range of use -This is designed for protection of sheet metal , spare parts , air compressors , motors, pumps etc.

Additional Information:

• Item Code: cavitywax
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: within 7 - 10 days
• Packaging Details: 400 ml / 500 ml aerosol can / 1 ltr can / 20 ltrs drum

Rusting of iron has been an age-old problem. Iron loses strength due to rusting. Iron spontaneously combines with oxygen and moisture to form a variety of oxides depending upon the conditions of exposure.

This is called "rust". However, this temporary passive stability is gone when the loose rust begins to flake away, exposing the inner surface to further process of rusting and so on.

Converust Primer is a revolutionary, hi-tech product that reverses the process of rusting. converting rust into a stable metal complex without losing the strength of the metal. This is accompanied by an encapsulation process through the formation of a protective film coat. Converust Primer when applied on the surface of the metal changes to a dark blackish coloured protective coating film. This marks the END OF RUSTING OR CORROSION of the metal surface. Converust is also a ‘water-based’ system and it is nonflammable and non-toxic

FEATURES

• It cures at low temperature and very good wetting properties.
• Highly recommended primer coat in protective coating system
• Can be top-coated easily with a broad variety of high performance finish coats.
• Good film build and edge protection
• Non-flammable, no health hazard, non-toxic
• No sandblasting required. Saves labor cost
• Excellent abrasion resistance

RECOMMENDED USE

Automobiles Industries : Body, Spare parts, Ancillary units, structures etc.

Industrial Fabrication : Machinery & Equipment mfg.

Building Construction : RCC structures.- Steel Rebar coating, Structure, Panel, Grills, Gates etc

Ports & Docks : Dry-docking, Jetty, Conveyor belts, Cranes, Pipelines etc.

Shipping Industries : Ship builders, Ship repairs, Containers etc,

Locomotive and Railways : Wagons, Bogies, Coaches, Tracks, Clips, Tankers, Cattle Carrier, Overhead Structures, Engines, etc.

Practically all types of industries where the problem of rusting of Iron is present

COLOUR : Pastel color : FINISH : Semi-glossy

SURFACE PREPARATION

Remove loose rust scales, flaking rust, old paint and dirt from the corroded metal surface with the use of wire brush etc.

However, there is no need to remove all the visible traces of rust, since the adherent rust is reactively converted into a stable polymer complex compound

Converust also does not require different steps of preparation of the metal surface like sandblasting, Phosphating or red oxide coating.

APPLICATION METHOD

Apply Converust with a brush or roller, by dip method or simply by spraying on. Apply two coats of Converust to get minimum DFT of 45/60 micron.

Pack Size :1 ltr Can

Additional Information:

• Item Code: RC-800
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 2 - 3 working days
• Packaging Details: 250 ml | 500 ml | 1 ltr | 5 ltrs | 25 Ltrs

Cavity Wax is a corrosion preventative that forms excellent films in cavities. The product is solvent borne and based on mainly synthetic waxes and corrosion inhibitors. When the solvent has evaporated, the product leaves a beige, waxy, water repelling protective film that offers a very good corrosion prevention.

Products in the Cavity Wax are designed for application in closed cavities & open surfaces

Rust preventive Fluid

• These also form a part of the cavity wax family.
• This Product is a rust preventive fluid with excellent film building properties on open surfaces as well as in cavities.
• The product is mainly based on synthetic waxes, oil, corrosion inhibitors and solvent of white spirit type.

Range of use -This is designed for protection of sheet metal , spare parts , air compressors , motors, pumps etc.

Pack Size available : 400 ml aerosol can | 1 ltr can | 20 Ltrs drum

 

Zn-layers can be damaged around:

• Cuts
• Spot welds
• Folds
• Edges

EC-coat does not reach all:

• Folds
• Joints
• Gaps
• High penetrating corrosion protection waxes prevent corrosion in these areas

These also form a part of the cavity wax family.This product is a rust preventive fluid with excellent film building properties on open surfaces as well as in cavities.

This product is mainly based on synthetic waxes, oil, corrosion inhibitors and a type of white spirit solvent.

Range of use -This product is designed for the protection of sheet metal, spare parts, air compressors, motors, pumps etc.

Additional Information:

• Item Code: Internalprotection
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 2 - 3 working days
• Packaging Details: 400 ml / 500 ml aerosol can / 1 ltr can / 20 ltrs drum / 200 ltrs drum

Product details:

Cavity Wax is a corrosion preventative that forms excellent films in cavities. This product is solvent borne and is based on synthetic waxes and corrosion inhibitors. When the solvent has evaporated, the product leaves a beige, waxy, water repelling protective film that offers a very good corrosion prevention.

Products in the Cavity Wax range are designed for application in closed cavities and open surfaces.

Pack Size: 400 ml Aerosol can

Additional Information:

• Item Code: 3852A
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: 400 / 500 ml aerosol can, 1 ltr can / 20 ltr drum / 200 ltr drum

TUFSEAL 4050 

This Product has the following properties -

• It leaves a hard , transparent film
• is heat resistant to both alkali and acids
• is heat resistant up to a temperature of more than 200 0C
• gives a shiny and clean film which facilitates a visual inspection of metal surfaces , reading of labels and numbers etc.
• has good adhesion and flexibility on rubber and plastic parts at both low and high temperature.
• has a very short drying time and is designed to be sprayed for on line protection

This product has been specially developed to be used on surfaces, which are exposed to both high and low temperatures.

Appropriate parts to be treated with this product are engine compartments, engines, and other details, which have to withstand high temperatures.

Application:

The above products can be applied by spraying with manual or automatic airless application equipment. It is suitable for either air mix or airless spraying.

Pack Size: 500 ml Aerosol can

Additional Information:

• Item Code: 4050A
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: 500 ml Aerosol can / 1 ltr can / 20 ltrs M S Drum

Engine Coating

This Product has the following properties -

• It leaves a hard , transparent film
• is heat resistant to both alkali and acids
• is heat resistant up to a temperature of more than 200 0C
• gives a shiny and clean film which facilitates a visual inspection of metal surfaces , reading of labels and numbers etc.
• has good adhesion and flexibility on rubber and plastic parts at both low and high temperature.
• has a very short drying time and is designed to be sprayed for on line protection

This product has been specially developed to be used on surfaces, which are exposed to both high and low temperatures.

Appropriate parts to be treated with this product are engine compartments, engines, and other details, which have to withstand high temperatures.

Application:

The above products can be applied by spraying with manual or automatic airless application equipment. It is suitable for either air mix or airless spraying.

Pack Size:1 ltr Can

Additional Information:

• Item Code: 4050L
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: Pack Sizes - 500 ml aerosol can / 1 ltr can / 20 ltrs MS Drum

• So as to furnish the changing and rising desires of our honored clients, we have brought forth an exceptional array of Engine Coating

 

Product details:

 

• Reliable

• Optimum quality

• Effective usage

• Accurate composition

• Effective results

• Longer shelf life

This product has the following properties:

- It leaves a hard, transparent film
- is heat resistant to both alkali and acids and is heat resistant up to a temperature of more than 200 degree centigrade
- gives a shiny and clean film which facilitates a visual inspection of metal surfaces, reading of labels and numbers etc.
- has good adhesion and flexibility on rubber and plastic parts at both low and high temperature.
- has a very short drying time and is designed to be sprayed for on line protection

This product has been specially developed to be used on surfaces, which are exposed to both high and low temperatures.
Appropriate parts to be treated with this product are engine compartments, engines, and other details, which have to Withstand high temperatures.

Application – These products can be applied by spraying with manual or automatic airless application equipment. It is suitable for either air mix or airless spraying.

Pack Size:20 ltrs M S Drum

Additional Information:

• Item Code: Enginecoat
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: 500 ml aerosol can / 1 ltr can / 20 ltr drum

Silencer coating treatment

This treatment is proved at the comapny's Work Shop in Mumbai only. 

Transportation Wax is a white coloured dispersion of waxes in solvent. After drying it gives a hard – waxy film. This film protects the painted metal from UV – radiation, aggressive chemicals and polluted atmosphere during transport & storage.

Even after 1 year in heavy conditions the film is easily removable with an organic degreaser. It does not affect other details commonly use in cars, such as rubber, plastics and aluminium.

Transportation Wax has low aromatic content. The product dries in minutes easily withstanding rain or water splashing.

Uses :

Transportation Wax is designed for protection of newly painted cars, trucks, tractors or other similar painted surfaces, casting, spare parts,

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: 20 ltrs drums

• Water based rust removers & convertors.
• Pack size – 1 ltr / 5 ltrs / 35 ltrs

Additional Information:

• Item Code: Rustremover
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days
• Packaging Details: Pack size - 1 ltr / 5 ltrs / 20 ltrs

Justifying our reputation in this highly competitive industry, we have brought a wide assortment of Underbody Chassis Coating.

 

Product details:

 

• Effective

• Safe to apply

• Longer shelf life

• Seamless finish

• Reliable

• Non-toxic

 

Additional Information:

• Item Code: Underbodycoating
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: Service available only at company work shop in Mumbai

Underbody Coating is a thixotropic corrosion preventive which provides long-term resistance against corrosion and abrasion even under difficult conditions. When the solvents have evaporated, a tough, elastic, waxy protective film remains on the sheet metal, giving a high degree of protection.

Uses : Underbody Coating is an under body product for treatment of cars, trucks and buses during production, at import plants and in the aftermarket. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar product. Zinc, rubber and plastics are completely unaffected by the product. A clean and economic treatment on the line Is assured by the product's easy application and high solid content.

Underbody Coating is also designed to be used on spare parts, machines and Iron and steel structures in highly corrosion Inductive conditions. It is also very suitable as a transport and storage anticorrosive for long term transporting or warehousing under extremely corrosive circumstances.

Application: Underbody Coating can be applied by spraying with manual or automatic airless application.

Variants of Underbody Coating Available

• Wax based underbody coating
• Bitumen based underbody coating
• Diesel resistant underbody coating
• Transparent underbody coating
• Acrylic under body coating

Pack Size:20 Kgs M S Drum

Additional Information:

• Item Code: UBC1
• Port of Dispatch: Mumbai
• Delivery Time: Within 7 - 10 working days